
Boat antifoul in Mandurah
We use International paints and pick the right product for your hull, how fast your boat goes and where you keep it.
Get an instant price estimate
Answer three quick questions for a price range based on your boat.
Enter your boat's length above for an estimate.
Propspeed and anode replacement are available while your boat's out of the water, quoted separately.
This is an estimate only. Your boat still needs a quick look before we confirm a price.
Re-coat
From $50/ft. For boats with existing antifoul in good condition.
- Pressure clean the hull
- Two coats of antifoul
New antifoul
From $100/ft. First time, or back to a bare hull.
- Lift onto stands
- Sand the hull
- One coat of primer
- Two coats of antifoul
Add-ons while it's out of the water
- Propspeed on propellers and running gear
- Anode replacement
- Outboard legs and stern drives below the waterline
- Polish and detailing on request
We can collect your boat from the water and bring it back, see pick up and delivery.

Antifoul in the yard
A few boats we have worked on at our Mandurah workshop.








Antifoul questions
What is antifoul and why does my boat need it?
Antifoul is a special paint for the bottom of your boat that stops barnacles, weed and slime from growing on it. Without it, a boat kept in the water quickly becomes a floating reef, which slows you down, burns more fuel and can damage your engine.
How often should I antifoul my boat?
For boats kept in the water (a pen, mooring or canal jetty), usually every 12 to 18 months. Boats that live on a trailer, boat lift or in dry storage often don't need antifoul at all, because the hull dries out between trips. Not sure? Give us a call and we'll take a look.
What happens if I skip it?
Growth on the hull creates drag, so you use noticeably more fuel and lose speed. Marine growth can also block your engine's cooling water intakes and cause overheating and expensive damage. A clean hull helps stop the spread of marine pests too.
Which antifoul is right for my boat?
It depends on your hull (fibreglass, aluminium or timber), how fast your boat goes, how often you use it and where you keep it. We use International paints and will recommend the right product for your boat as part of your quote.
Can you antifoul an aluminium boat?
Yes, with the right paint. Standard copper-based antifoul must never go directly on aluminium, because it causes galvanic corrosion that eats away at the metal. Aluminium hulls need a compatible antifoul and the correct primer system, and we make sure your boat gets the right one.
Can you paint over my old antifoul?
Often, yes, if the old paint is in good condition and compatible with the new paint. Some paint types don't mix. If we don't know what's on there, we apply a barrier primer first so the new coat sticks properly.
Other services


Marine electrical
Find out more
Engine & accessory fitouts
Find out more
Marine aluminium fabrication
Find out more
Trailer repairs
Find out more
